foreye.blogg.se

These settings will reset after the vehicle sleeps for at least 20-30 minutes. Some rebranded generic ENET WiFi adapters alter the vehicle’s IP configuration from default. Go back to the bootmod3 app and you should see the vehicle’s VIN showing. Network Prefix Length ( if showing): 16 <- CHANGE FROM 24 to 16!Īt this point, your Android device is configured for Ethernet with the vehicle. This default alternative has also worked on Samsung S20 Ultra Android 10: 169.254.250.1 To configure the BM3_NET WiFi network and change from DHCP to Static IP and enter the following IP network information: If this is what you’ve done, press and hold on the BM3_NET wifi network and click on the ‘Forget network’ menu so you can do it again. If you skip this part and click on it to connect it will wait a long time to try and connect.

Wait for the BM3_NET Wifi network to show up among your available networks, but DO NOT connect to it right away! Click on the ‘gear’ icon on the right and configure its IP settings first. In case you have an older device that is running an earlier version of Android than 6.0.1, or you’d simply like to use a wireless connection with your BM3 WiFi Adapter, follow these instructions to set up your WiFi settings on your phone. Option #3 BM3_NET WiFi Connection - (All Android versions)Įnsure your BM3 WiFi Adapter is running the latest Standard edition firmware on the device’s SD card, instructions here: For Android 11 Ethernet-USB connectivity see section above. These settings DO NOT seem work on Android 11 as tested on Samsung S20 Ultra running latest Android update at this time (Feb 2nd 2021). To avoid waiting that long and have it reset the vehicle’s network configuration, disconnect the ground wire on the vehicle’s battery for 3 minutes and reconnect it.